©2012 ICS - Blount Inc, Specifications subject to change without notice. REV11272012 P/N 546529
63
695GC/F4 SERVICE MANUAL
20.1
Crankcase seal puller and punch.
20.3
Seal removal.
A.) Insert T-handle puller over the shaft.
B.) Apply downward pressure to the
T-handle and turn the barrel clockwise
with a wrench to thread into the seal.
20.2
Crankcase seals.
20. CRANKCASE
20. This section covers the disassembly, inspection and assembly of the crankcase seals and
bearings.
