©2017 ICS - Blount Inc, Specifications subject to change without notice. REV19JUNE2017 P/N 598901
30
695XL SERVICE MANUAL
9.9
Inspect rope (P/N 544023) and pulley (P/N
544127). Replace if necessary. Note the
orientation of the knot.
9.7
Note the orientation of the parts for
re-installation.
9.8
A. Lift pulley from spring housing. NOTE:
the spring catch and spring hook must
be aligned during installation
(arrows).
B. Remove the two screws holding the
spring housing.
C. Use CAUTION when removing the
spring to prevent the spring from
unwinding.
D. Inspect spring and lubricate with light
oil.
E. Align notch in spring housing with end
of spring.
9. STARTER
