814 OPERATOR’S MANUAL
5
SAFETY
THE FOLLOWING CAUTION SYMBOL APPLIES TO ALL ITEMS LISTED IMMEDIATELY BELOW
A potentially hazardous situation exists which, if not avoided, may
result in minor or moderate personal injury.
•
Always turn the hydraulic power supply OFF when performing maintenance on the saw.
•
SealPro™ diamond chains require a minimum water pressure of 20 psi (1.4 bar). Insufficient
water supply may result in excessive wear to the chain, which can lead to loss of strength and
chain breakage.
•
Never start a diamond chaninsaw unless the bar, chain and side cover
are properly installed.
GENERAL SAFETY PRECAUTIONS
•
Always wear protective clothes, including hard hat, eye protection, hearing protection, and gloves.
•
Always operate tool with solid footing and handgrip.
•
Slurry can be very slick. Remove or control to prevent yourself or others from slipping while cutting.
•
Always work in a cleared area.
•
Be sure there are no obstructions (plumbing, electrical conduit, air ducts) and no unnecessary people
present.
•
Set up a well-marked safety zone with a roped boundary and clear signs.
•
Breathing exhaust gasses is dangerous. Provide ventilation in closed areas.
•
To avoid electrocution, check for live electrical wiring near cutting area.
CAUTION
