Auto Passport Installation Guide
Page 7
Copyright © Innovative Control Systems, Inc.
10 Amp Circuit Breaker
in the left side of the head of the
Auto Sentry
flex
6 Amp Circuit Breaker
Instructions to Power Down the Auto Sentry
flex
WARIGE: Failure to turn off the Auto Sentry increases the risk of serious bodily injury or death.
1. On the site server desktop, click on the VNC icon for the Auto Sentry
flex
.
2. On the menu bar, click the Windows flag icon.
3. Click the Shutdown button.
4. Wait until the Auto Sentry
flex
display goes to a white screen.
5. Open the rear doors of the Auto Sentry
flex
.
6. Inside the head of the Auto Sentry
flex
, turn off the power switch.
7. Inside the left side of the head of the Auto Sentry
flex
, turn off both Circuit Breakers by pressing the blue buttons on the breakers
until they click out. See Figure 7.
8. Inside the base of the Auto Sentry
flex
, turn off the breaker by pressing the blue button on the breaker until it clicks out.
Figure 7. Circuit Breaker Location
9. Shut off the electricity by turning off the Auto Sentry
flex
breaker inside the ICS® power distribution box.
