Auto Sentry® Petro - Installation Guide
21
Molded Plastic Installation
16.
Install and tighten (3) #10 x 1- 1/2” screws with #8 flat washers (Bag C) across the top of the
blue roto mold front cover. See Figure 14.
Figure 14. Attach Blue Roto Mold #4 with 3 screws to gray Roto Mold #3
17.
In the holes that are set deep inside the back of the Auto Sentry® Petro pedestal, install
(8) #10 - 32 x 1" screws with #8 washers (Bag J). See Figure 15.
DO NOT OVER TIGHTEN. Five pound-foot torque is recommended. Over torquing
could cause shearing or cracking.
Figure 15. Back of the Auto Sentry® Petro, tighten 8 screws