1-6
Introduction
Product Specifications
J
Main processor:
Intel Celeron or Pentium III FC-PGA processors,
CPU bus clock of 66/100 MHz, CPU core/bus clock ratio of x2 to x8
J
BIOS:
AMI system BIOS with 256kB Flash ROM to support Desktop
Management Interface (DMI), Plug-n-Play (PnP), the Green function,
and an Advanced Configuration and Power Interface (ACPI) (option)
J
Main Memory:
Four 168-pin DIMM sockets, supporting 3.3V
Synchronized Dynamic Random Access Memory (SDRAM) with parity/
ECC support up to 1GB
J
L2 Cache Memory:
128kB L2 cache in Celeron processor and 256kB
L2 cache in Pentium III processor
J
Chipset:
Intel 440BX chip set
J
Bus Interface:
Follows the PICMG standard (32-bit PCI and 16-bit
ISA bus), fully complies with PCI bus specification V2.1
J
PCI IDE Interface:
Supports two enhanced IDE ports for up to four
Hard Disk Drive (HDD) devices up to Ultra DMA/33 mode 2 timing
transfer
J
Floppy Drive Interface:
Supports one Floppy Disk Drive (FDD) port
up to two floppy drives [5.25-inch (360k, 1.2MB), 3.5-inch (720k,
1.2MB, 1.44MB, 2.88MB) diskette format].
J
Serial Ports:
Supports two high-speed 16C550 compatible UARTs
with 16-byte T/R FIFOs
J
IR Interface:
Supports one 6-pin header for serial Fast/Standard
Infrared wireless communication
J
Parallel Port:
Supports SPP, EPP/ECP, and bi-directional modes
J
USB Interface:
Supports two USB ports for high speed I/O peripheral
devices
