Overview 3-3
Sy
st
em Inst
alla
tio
n
Overview
This chapter describes how to set up your system, install M-system’s Flash disk,
set up the LCD display, and handle WDT operation.
Socket 370 Processor
Installing a CPU
1)
Note the CPU speed and voltage type to adjust the jumper settings
properly.
2)
Lift the CPU socket lever outwards and upwards.
3)
Align the processor pins with the pin holes in the socket. Make sure the
notched corner or dot mark (pin 1) of the CPU corresponds to the socket’s
beveled end. Press the CPU gently until it fits into place.
4)
Push down the lever to lock the processor chip into the socket.
5)
Follow the installation instructions for the cooling fan and heat sink to
mount it on the CPU surface and lock it on the socket 370.
