3-6
System Installation
Installing the Single Board Computer
To install the Endeavor Plus single board computer into a standard chassis or a proprietary
environment, perform the following steps:
1)
Ensure that all jumper settings are in their proper position.
2)
Install and configure the CPU and memory module(s) in the right position.
3)
Place the Endeavor Plus into the determined position in your system.
4)
Attach cables to existing peripheral devices as appropriate and secure them to the
chassis with the screw on the L-bracket
.
AIC-7892 Ultra-160/m SCSI Host Adapter
The following table shows how to enable and disable the onboard Ultra-160 SCSI function
using JP4. The 7892 SCSI driver is in the SCSI directory of the Endeavor Plus CD.
CAUTION
Be sure to take proper care electrostatic precautions
before
starting any work.
CAUTION
Ensure the single board computer is properly inserted and
secured to the chassis so contacts remain in place.
JP4
FUNCTION
1-2
Enable onboard SCSI
2-3
Disable onboard SCSI
