4-32
BIOS Setup Information
Hardware Monitor Setup
This Setup describes current system status detected by the hardware monitor controller. The
status showed on the screen will include:
t
CPU Ratio Selection
s
This option is for unlocked processors only.
If your socket 370 processor’s
Frequency Multiple is locked, setting the Frequency Multiple here will have
no effect. This option sets the Frequency Multiple between the CPU’s
internal and external frequencies. This must be set in conjunction with
CPU
Bus Frequency
to match the speed of your CPU.
t
Current System Temperature (Generally indicates the inside temperature of the
chassis or surface temperature of the SBC)
t
Current CPU Fan Speed
t
Current Chassis Fan Speed, if connected to a tach fan
t
System operating voltage (choices include “CPU Vcore”, “CPU Vtt”, “Vcc3”,
“+5V”, “+12V”, “-12V”, and “-5V”.)