www.icstation.com
6
The first line displays weight value, and the unit is KG.
The second line displays D=single item weight, number of N= items.
Keypad introduction:
1234567890 represents the number, the keyboard can set the value of P=,
the value can be accurate to 0.1g.
After setting the unit price, the system will automatically calculate the
Number N
A: clear.
B: clear unit price P
C: switch to “calendar time mode”
D: switch to the “counting scale mode”
5>. System calibration method
After the switch on, the system is stable, put a fixed weight object(Known
weight items) on the scale. If the system is not equal to the fixed weight display,
then press button “#” for 3 seconds. Then the right side of the first line of the
screen shows the “calibration factor". After the calibration factor appears, the
calibration factor can be increased and reduced by the buttons C and D
respectively. By adjusting the "calibration factor", the weight displayed on the
screen is exactly equal to the weight of the object. Finally, press button "#" for 3
seconds, the calibration factor disappears, the calibration is complete.
Summary of Contents for Trans-CRS-162DZC
