- 6 -
A6 Pin-out Assignments (S.T.D. Pulse for 117V AC)
(6) 6-2
For the 117V AC version of the A6 bill validator, connect the 30-pin peripheral
connector on one end of the harness (
part no. WEL-M008
, see page.12 for
pin-out information) to the side of the unit and the 9-pin mating connector to the
117V AC power harness (
part no. WEL-M010 and WEL-M012
, see page.13,14
for pin-out information).
9-pin mating connector pin-out assignments:
Pin 1 NEUTRAL INHIBIT
Pin 2 NEUTRAL ENABLE
Pin 3 HOT ENABLE
Pin 4 117VAC HOT (Power)
Pin 5
Earth - Ground
Pin 6 117VAC NEUTRAL(Power)
Pin 7 CREDIT_RELAY(N.O.)
Pin 8 CREDIT_RELAY
(Common)
Pin 9 Reserved
IMPORTANT:
On 117V AC units, the Earth Ground must be located inside the machine.
Dual-in-line 30-pin peripheral connector (A6, 117V AC) pin-out assignments:
1
2
3
4
5
6
7
8
9
10
25
19
11
26
20
12
27
21
13
28
22
16
14
29
23
17
15
30
24
18
CAUTION:
Turn off the power before connecting or disconnecting the
bill validator.
Pin 16 - CREDIT_RELAY(N.O.)
Pin 17 - Reserved
Pin 18 - HOT ENABLE
Pin 19 - KEY
Pin 20 - 117VAC HOT(Power)
Pin 21 - EARTH GROUND
Pin 22 - Reserved
Pin 23 - Reserved
Pin 24 - Reserved
Pin 25 - Reserved
Pin 26 - Reserved
Pin 27 - Reserved
Pin 28 - Reserved
Pin 29 - Reserved
Pin 30 - Reserved
Pin 1 - CREDIT_ RELAY(Common)
Pin 2 - Reserved
Pin 3 - NEUTRAL ENABLE
Pin 4 - 117VAC NEUTRAL(Power)
Pin 5 - NEUTRAL INHIBIT
Pin 6 - KEY
Pin 7 - Reserved
Pin 8 - Reserved
Pin 9 - Reserved
Pin 10 - Reserved
Pin 11 - Reserved
Pin 12 - Reserved
Pin 13 - Reserved
Pin 14 - Reserved
Pin 15 - Reserved
1
2
3
6
5
4
7
8
9
- 7 -
V6 Pin-out Assignments (M.D.B. System for 34V DC)
(7) 7-1
For the MDB interface V6 bill validator, connect the 30-pin peripheral connector
on one end of the harness (
part no. WEL-M006
, see page.10 for pin-out
information) to the side of the unit and the standard 6-pin MDB connector to the
power/interface connector.
The standard 6-pin MDB connector pin-out assignments:
Pin 1 - 34 VDC
Pin 2 - 34 VDC Power Return
Pin 3 - N/C
Pin 4 - Master Receive
Pin 5 - Master Transmit
Pin 6 - Communications Common
Dual-in-line 30-pin peripheral connector (V6, MDB) pin-out assignments:
1
2
3
4
5
6
7
8
9
10
25
19
11
26
20
12
27
21
13
28
22
16
14
29
23
17
15
30
24
18
4
5
6
3
2
1
CAUTION:
Turn off the power before connecting or disconnecting the
bill validator.
Pin 16 - 34VDC_RETURN
Pin 17 - Reserved
Pin 18 - Reserved
Pin 19 - Reserved
Pin 20 - Reserved
Pin 21 - KEY
Pin 22 - Reserved
Pin 23 - +34VDC
Pin 24 - Reserved
Pin 25 - Reserved
Pin 26 - Reserved
Pin 27 - Reserved
Pin 28 - MDB_GND
Pin 29 - Reserved
Pin 30 - Reserved
Pin 1 - Reserved
Pin 2 - Reserved.
Pin 3 - Reserved
Pin 4 - Reserved
Pin 5 - KEY
Pin 6 - MDB_MASTER_RXD
Pin 7 - Reserved
Pin 8 - Reserved
Pin 9 - Reserved
Pin 10 - Reserved
Pin 11 - Reserved
Pin 12 - Reserved
Pin 13 - Reserved
Pin 14 - MDB_MASTER_TXD
Pin 15 - Reserved
