2-4. Initialization Checklist
While vending machine in an energized state,
please DO NOT plug/unplug any wires on
CC6100.
Please ensure that there are no interferences
between the connected wires, the coin insert
and return device, and the door of the automatic
vending machine. After the inspections are
complete, then turn on the vending machine
power.
Check the amount of coins in each coin tube is
above the minimum requirement level. Please
refer to sticker on the tube cassette for minimum
level information. (The coin changer would not
work correctly without enough coins in the coin
tubes.)
After refill of tube cassette, the coin changer will
detect the adequate coin quantity within a few
seconds.
Dispense at least 1 coin from each coin tube to
ensure that the dispensed coins fall into the coin
return box of the vending machine.
X
-6-
CC6100
