SYSTEM OVER-CURRENT ALARM
Over-Current Threshold:
If the total system current rises above the value in this field, the system
over-current alarm will trigger.
The system current must remain above the over-current threshold for at least 5 seconds before the
alarm will be triggered.
Activate Alarm Form C Contact:
If this box is checked, the alarm form “C” contacts on the panel will
indicate a fault condition when the system over-current alarm is triggered.
Send E-mail:
If this box is checked, an e-mail alarm notification will be sent when the system over-
current alarm is triggered. The e-mail settings on the
E-mail Setup
page must be configured correctly
before e-mail notifications can be sent.
ALARM INPUT #1 - #5
Alarm Name:
Allows you to assign a custom name to each individual alarm input.
Contact Type:
Allows you to configure each individual alarm input as a “Normally Open” contact, a
“Normally Closed” contact, or as “Not Used”.
If the alarm input is configured as “Not Used”, it will be disabled and will not appear on the
Status
page
or on the LCD screen.
Activate Alarm Form C Contact:
If this box is checked, the alarm form “C” contacts on the panel will
indicate a fault condition when this alarm input triggers.
Send E-mail:
If this box is checked, an e-mail alarm notification will be sent when this alarm input
triggers. The e-mail settings on the
E-mail Setup
page must be configured correctly before e-mail
notifications can be sent.
17
