22
Innovative Circuit Technology Ltd.
Alarm Inputs
The Alarm Inputs Status screen displays the current status of the four alarm
inputs provided on a power shelf equipped with the ICM. Use these inputs to
monitor voltage-free external contact closures such as door sensors, smoke
alarm outputs or a water sensor.
The Alarm Input Status screen shows the state of these contacts, changing from
OK to ALARM when a contact activates. Configure the logic of the external
contact type selecting Normally Open (NO) or Normally Closed (NC) to activate
the alarm inputs using the web-GUI Alarms Settings & Control tab. The factory
default setting has the alarm inputs disabled; you must select a contact type for
each input to enable it.
Alarm History
Scroll through the Alarm History screens to see a log of the 20 most recent
alarm events. These alarms may have been raised by any module experiencing
an alarm, or by one of the four external Alarm Inputs being triggered.
Press Enter or scroll to see the Alarm
History log
Alarm Input Status screen
Scroll to highlight parameter to change
•
Output Voltage
•
Current Limit
•
Output Enable (ON/OFF)
Press Enter to select parameter to adjust
Scroll to change setting. Press Enter to
set, press Back
X
button to exit without
changing
