38
Innovative Circuit Technology Ltd.
Network Watchdog
Enable the Network Watchdog to cycle power output on loss of
communications. The watchdog can monitor one or two external IP addresses.
Watchdog Enabled:
Tick this box to enable the network watchdog.
Primary IP Address
: Set an IP address for the unit to ping to determine if
the network is functioning.
Secondary IP Address:
Set a second IP address if desired.
Watchdog Timeout:
Enter the time (1-60 minutes) for the system will wait
with no ping response from either IP address before initiating a reset.
Reset Target:
Select what output to power cycle if the watchdog times out.
Set the Auto-Restart Delay time on the System, Settings & Control tab to
define how long the system will be off when the watchdog timeout is
triggered.
[note] Selecting LDM Channel Outputs on a Hybrid Series 1RU units will
have no affect as there are no LDM channels on these products.
Data Logging:
Enable
Data Logging
to keep a running record of all the key system parameters
and alarms, recorded once per minute. The log will save the last 30 days. Click
on the
Download Log (CSV)
button to store the CSV format log file on your
computer for further analysis.
