Innovative Circuit Technology Ltd.
43
Trap Community:
Assign the community string/password that will be
sent with all SNMPv1 traps. Some trap receivers are able to filter based
on Trap Community.
Trap User Name:
Assign the user name for SNMPv3 traps.
Authentication Protocol: Select the authentication protocol for
SNMPv3 traps
•
None
,
•
MD5
, or
•
SHA
.
Authentication Password:
If an authentication protocol is selected,
enter the authentication password for SNMPv3 traps.
Privacy Protocol:
Select the privacy protocol for SNMPv3 traps
•
None
, or
•
AES
.
Privacy Password:
If a privacy protocol is selected, enter the privacy
password for SNMPv3 traps.
Trap IP Addresses:
Enter the IP addresses for up to two devices that
will receive SNMP traps from the power system.
E-MAIL SETUP
Select the
E-MAIL SETUP
tab to configure all e-mail settings to enable automatic
e-mail notifications directly from the unit. The information required for this is
available from your network administrator, or internet service provider. (ISP)
