48
Innovative Circuit Technology Ltd.
other systems to locate this file and then import it to any other MPS you are
logged in to, greatly simplifying the configuration of multiple identical units.
Firmware Update:
Download the latest Hybrid Power Series firmware file from
the ICT website (ict-power.com) to your local computer. De-compress this
.cry
file then press the
Update Firmware
button, and link to this file. Update the
firmware on the power system control module by clicking the
Update Now
button. Note that the system settings will not be changed. Do not remove AC
power during the update process!
Send Test E-mail
: Click the
Send Test E-mail
button to send a test e-mail to the
listed e-mail recipients using the e-mail settings on the
E-mail Setup
page.
Ping Diagnostics Tool
: Use this feature to verify connectivity of any network
connected device. Enter the hostname or IP address of the target device, and
then click the
Ping
button to check if the device is active.
Router Configuration
Use this section to help you set up your Hybrid Power Series with remote
Internet access when it is located behind a router.
A router allows multiple PC’s
to share a single Internet connection, and must be
configured correctly to forward incoming remote data to the local IP address of
your power system.
Example configuration using a Linksys WRT54G router: (others will be similar)
1.
Log into your router and go to the port forwarding screen. In the
example Linksys WRT54G router this is located in the Applications and
Gaming tab. The location of the port forwarding fields may be different
on your particular router. (consult the router manual for instructions)
2.
Configure HTTP forwarding:
a.
Enter a unique name in the
Application
field
b.
Enter the HTTP port number that the power system is using in the
Start
and
End
fields. The default HTTP port for the system is
80
.
c.
Select
Both
under
Protocol
(TCP and UDP)
d.
Enter the local IP address of the power system (e.g. 192.168.0.180)
in the
IP address
field. (see step 2 of the
Operation (Network GUI)
section to verify the system IP address)
e.
Check the
Enable
box, and then click on
Save Settings
