ICT ICT180S-12IRC, Instruction Manual

Reverse Sequence Order: I

f this box is checked, the outputs will be enabled in reverse sequence 

(Output #12 first, Output #1 last) when the 

Enable All Outputs

 button is pressed on the 

Status & 

Control

 page.

NETWORK WATCHDOG

Watchdog Enabled: 

Checking this box will enable the Network Watchdog feature. The Network

Watchdog will periodically Ping up to two remote IP address to check the network connection status. If 
the remotes IP address stops responding, the Panel will power-cycle any outputs that have the 

Power 

Cycling

 option enabled. This feature is useful for rebooting a modem or router following a crash that 

has resulted in loss of IP connectivity. For the Network Watchdog to work, at least one output must have 
the 

Power Cycle 

option enabled, and a time delay must be entered in the 

Sequence / Cycle Delay

field.

Primary IP Address:

 Enter the remote IP address you would like to monitor. This field is optional; if left 

blank, the Network Watchdog will instead monitor the Gateway IP address listed on the 

Network Setup

page.

Secondary IP Address:

 An optional second remote IP address can be entered in this field. If entered, 

the Network Watchdog will only trigger if both the Primary and Secondary IP Addresses fail to respond.

Watchdog Timeout:

 Enter the time duration, in minutes, that the remote IP addresses must stop 

responding to Ping requests before the Network Watchdog will trigger and power-cycle outputs. The 
default setting is 10 minutes. The Watchdog Timeout can be changed to anything between 1 and 80 
minutes. Make sure that the Watchdog Timeout value is set longer than the time it takes for your 
network hardware to fully start up.

DATA LOGGING

Data Logging: 

Allows you to enable data logging. With data logging enabled, the panel will record the 

system voltage, system current, output currents, fuse status, and alarm input status at a sample rate of 
1 sample per minute. To view the log while data logging is enabled, click on the 

Download Log button

next to the data logging dialog box. This will download the log in Comma Separated Values (CSV) 
format, which can be opened by most spreadsheet software applications such as Microsoft Excel. The 
log will hold up to 30 days of data, with oldest log entries at the top of the log file.

12