24
Innovative Circuit Technology Ltd.
Record your new password for future access! If the Administrator password is
lost the unit must be reset to return the password to the blank default setting,
causing loss of all other user settings. See the
Password Reset
section for more
details.
Select a User to Edit
: Choose which of the two user accounts to edit.
Administrator
(user name:
admin
) This account has full access to the panel
settings.
Standard User
(user name:
user
) This account has read-only access to the
panel, and cannot enable or disable the outputs, or change any of the panel
settings.
New Password:
Use these fields to change the password of the selected user.
New Password
: Enter the new password for the chosen user.
Confirm New Password
: Re-enter the new password to confirm the entry.
Confirm Changes
: Enter the current
Administrator Password
to confirm the new
password changes, prior to saving the settings.
Maintenance
Use this page to reset the panel (soft reset), restore the panel default settings, or
send a test e-mail to verify e-mail functionality.
Reset Distribution Panel
: Clicking the
Reset
button will restart the panel.
Channel output states will be restored according to the
Output State after Panel
Reset
setting for each output on the
Output Setup
page. All other setting are
maintained during the reset.
Restore Factory Default Settings
: Clicking the Restore button will restore
ALL
settings to the original factory default values, including the user passwords. To
only restore the network settings and passwords see the
Password Reset
section.
Send Test E-mail
: Click the
Send Test E-mail
button to send a test e-mail to the
listed e-mail recipients using the e-mail settings on the
E-mail Setup
page.
Ping Diagnostics Tool
: Use this feature to verify connectivity of any network
connected device. Enter the hostname or IP address of the target device, and
then click the
Ping
button.