30
Innovative Circuit Technology Ltd.
PRODUCT SPECIFICATIONS
Operating Voltage (either bus): 10VDC to 60VDC, or -10VDC to -60VDC
Current Rating:
100A max, 80A continuous Bus A
100A max, 80A continuous Bus B
25A max, 20A Continuous per output (12/24V)
15A max, 12A Continuous per output (48V)
Fuse Capacity (ICT200DF):
25A Max ATO 32V x 6 per bus (12/24V)
15A Max FKS-ATO 80V x 6 per bus (48V)
CAUTION: Use only 80Vdc rated fuses, 15A max each for nominal 48Vdc
systems, or 25A max for 12 or 24V systems
NOTE:
Fuses should normally be operated continuously at no more
than 80% of their nominal current rating
Breaker Capacity (ICT200DB):
25A Max 65Vdc x 6 per bus (12/24V)
15A Max 65Vdc x 6 per bus (48V)
CAUTION: Use only 65Vdc rated breakers, 15A max each for nominal
48Vdc systems, or 25A max for 12 or 24V systems
NOTE:
Breakers should normally be operated continuously at no more
than 80% of their nominal current rating
Meter Accuracy, Voltage:
Bus voltage re/-1%
Meter Accuracy, Current:
Channel current re/- 3%
Power Consumption:
< 6 W (all outputs disabled)
< 24W (all outputs enabled)
Alarm Form-C Contacts:
1 output per bus, 1A 60VDc max
Alarm Sensor Inputs:
Five external dry contact alarm inputs,
configurable for NC or NO contacts. Applied
voltage 3.3V, 0.4mA for contact closure
detection
Ethernet:
10Base-T/100Base-T, RJ45 Connector
SNMP:
SNMP v1/v2c supported
Input Connector:
4x Insulated M8 Stud, with slip-on insulating
boot, 75in-lb max torque