ELECTRIC BICYCLE METER KT
—
LCD7C Product User Manual
- 34 -
When L4=5, the delay time is 5 minutes.
When L4=6, the delay time is 6 minutes.
When L4=7, the delay time is 7 minutes.
………….
When L4=120, the delay time is 120 minutes.
○
Exit Parameter Setting
Among the fourteen C parameter settings, when each parameter setting is completed,
if held
button (
SW
) long for about 2 seconds, all can exit the setting environment
and return to display 1, meanwhile, the current set parameters would be saved.
Under each parameter setting interface, if there’s no button operation on the meter for
more than 1 minute, and then the meter will automatically return to display 1, and the
original set parameters will be saved.
Parameter Copy
Set parameters (include general project parameter, P parameter and C parameter) of
all KT-LCD7C meter produced by our company according to requirements, and set the
meter to be a data source according to the method of
"C11 meter attribute selection
setting".
Use special wiring cables to properly wire to LCD7C meter needs to be copied
according to the diagram.
