Technical Specifications
The following specifications are important and vital to the correct operation of this product. Failure to adhere to
the specifications will result in any warranty or guarantee that was provided becoming null and void.
Ordering Information
PRT-4G-USB
Protege DIN Rail Cellular Modem
Power Supply
Operating Voltage
12V DC
Operating Current
300mA (Max)
Communications
USB
USB-C
SIM Card Socket
Micro-SIM
Cellular Technology
4G, Dual Mode LTE-M/NB-IoT
LTE Cat-M1
Uplink up to 1 Mbps
Downlink up to 588 Kbps
LTE Cat-NB2
Uplink up to 160 Kbps
Downlink up to 120 Kbps
Operating Frequencies (LTE)
B1 (2100 MHz), B2(1900 MHz), B3(1800 MHz), B4, B66(1700 MHz),
B5, B27(850 MHz), B8(900 MHz), B12, B13, B85(700 MHz),
B18, B19, B20, B25, B26, B28(800 MHz), B71(600 MHz)
Antenna Connection
Antenna Connector
SMA
Antenna Impedance
50ohm
Antenna Gain,VSWR
5dBi,
≤
2
Antenna Frequency
4G wide band 600-2700 MHz
Polarization and Radiation Direction
Vertical, Omnidirectional
Length
320 ± 3 mm (12.6 ± .12 ")
Base Diameter
30 ± 2 mm (1.18 ± .08 ")
Mounting
Magnetic Base
Dimensions
Dimensions (L x W x H)
39 x 90 x 60mm (1.53 x 3.54 x 2.36")
Net Weight
70g (2.5oz)
Gross Weight
200g (7.1oz)
Operating Conditions
Operating Temperature
-10° to 55°C (14° to 131°F)
Storage Temperature
-10˚ to 85˚C (14˚ to 185˚F)
Humidity
0%-93% non-condensing, indoor use only (relative humidity)
PRT-4G-USB | Protege DIN Rail Cellular Modem | Installation Manual
13
