Office
is DISARMED
The area will automatically re-enter the arming process after the
defer arm time
has elapsed.
Each time the arming process begins again you will have the opportunity to defer arming.
Arming / Disarming Area Groups
Area group control is an option that must be enabled by your installer.
If you have sufficient access, it is possible to arm or disarm all of the areas on the keypad at the same time.
1.
Select
[MENU, 1]
to view the Arm/Disarm menu.
2.
Press the
[RIGHT]
key to view the area group controls.
Press [Arm] or
[Disarm] to
control group
All Areas
3.
Press
[ARM]
,
[DISARM]
,
[STAY]
or
[FORCE]
to control every area in the group.
4.
If the command succeeds, you will see a success message and return to the Arm/Disarm menu.
Area group
is Disarming
Area group commands will only succeed if it is possible to control every area in the group. For example, if one
area has an open input that prevents arming, none of the areas will be armed.
PRT-KLCS | Protege Touch Sense LCD Keypad | User Manual
16
