6
Illustration for the introduction of function
Front panel
1. HDMI signal input indicator light
2. Power switch
3. Power light
Real panel
4. Power input, support AC100-240V input
5. Ground terminal
6. HDMI INPUTS —Connected with five channel HDMI signal input. If video channel to
electricity after plug wire first, then the default minimum video output channel number,
such as: at the same time input 2, 3, 4 video source output 2 way to OUT. Should after
electricity access video signal, the output is the default of the thrust line of the video signal
source all the way.
7. HDMI OUT —Output HDMI high definition video signal
8. CODE —Camera type, communication protocol and Baud rate set switch(Not
support other vendor’s protocol yet )
9. CAMERA NET—Used for high-speed camera RS-232
10. CAMERA NET—Used for high-speed camera RS485
11. DATA—connected with conference system controller TH-0802M
12. CONFERENCE —connected with conference controller (TS series conference
system controller)
13. CONTROL —connected with control system(PC)
