7
Specification
PC software usage introduction
1. five video Channel
First of all, set up conference platform,
1) Video channel IN1 - IN5 input respectively connected with the camera address the 1-5
video output.
2) Open the PC software, setup the port, through the switch of software, the screen can
show different frames of different channel.
3) Open the PC software, setup the port, through the switching of PC software to check
each channel frame quality and speed. And it also have the save function when the power
cutout.
2. Obtaining the dates of DIP switch (The factory default setting is at OFF position )
1) Dialing the DIP switch on the rear of the unit after re-power on(only effective after
re-power on), click “Obtain” key on the PC software to get the DIP switch settings of
Model
TS-0698
Power supply
AC100-240V 50/60Hz
Max power consumption
7W
Video signal bandwidth
1.65GHz
Video input signal electronic level
1.2 volts p-p
DCC input signal electronic level
5 volts p-p (TTL)
Single channel connection signal range
1080p/1920x1200
HDMI Connector
Type A needle 19 female head
Power
15W
Weight
About 3Kg
Dimension
484(L)× 210(L)× 44(H)mm
Color
Black
