9
4. Pre-setting, delect and setting of the ceiling camera
Selecting the right camera protocol (setting in the unit), input the camera address and
pre-setting position to begin the operation of controlling.
5. Setting the pre-setting of the delegates
1) Selecting the right protocol, camera address, pre-setting position and delegate address,
adjusting the camera position through the “UP-DOWN-RIGHT-LEFT” keys to make sure it
points to the right delegate and then click “SAVE” to finish the setting progress. Settiing all
the pre-setting positions of the delegates in sequence to make sure the camera poins
automatically when any delegate turns on.
2) After setting all the delegates, please set the pre-setting position of the textbox as the
panoramic position. Click “setting panoramic position” to set the whole panoramic position
of the meeting place. (When all the mic delegates are turned off, the camera will turn back
automatically.)
5.1 Protocol test of controlling camera
Selecting either VISCA protocol or RS232/485 or Pelcd protocols to control the rotation of
the camera and the pre-setting.
