SINGLE ARM ELITE INSTRUCTIONS - rev 04/21/14 pjm
SINGLE ARM ELITE
Page 4 of 4
ATTACH PARALINK KEYBOARD TRAY
Loosen knob to adjust Paralink.
Adjust horizontally for keyboard tray
and vertically for monitor. Tighten
knobs when in desired position.
Attach the keyboard tray
to the Keyboard Mount
using the supplied 5/16-
18 socket head screw.
ADJUST BALL VESA
TENSION & HEIGHT
Use the slider knob to
loosen the slider to adjust
the height of the monitor
on the Paralink.
Adjust the pivot tension
of the ball by gently and
evenly tightening or
loosening the four screws
on the back of the ball
VESA.
Slider Knob
Pivot tension
adjustment
screws
ATTACH VESA TO MONITOR
Attach VESA to
monitor using four
4mm screws in the
hardware bag.
ADJUST
PARALINK TILT
Adjust monitor to desired
position with ball VESA.
Tilt your monitor 50°
in any direction. Adjust
your monitor between
portrait and landscape
by rotating ball VESA.
Adjust monitor depth
by moving the paralink
forward or back then
t i g h t i n g t h e d e p t h
adjustment knob.
Depth
Adjustment
Knob
IF USING PARALINK
ATTACH PARALINK KEYBOARD TO MONITOR
Attach the Paralink
Keyboard Mount to the
Monitor Mount by using
the 3/8-16 screw and lock
washer provided.
ATTACH FLIPUP TO DROP PLATE
Attach the tray
fl ip-up assembly
to the drop plate
using the provided
fl at head screws
and hex key.
IF USING ULTRA KEYBOARD
