A. Once the arm assembly is fixed to the ceiling
mount and adjusted to the neutral setting,
move the arm to it’s vertical position.
Long arm covers and end covers should
be removed.
A. Place Paralink up to base of arm and
insert stud.
B. Place flat washer, thrust bearing assembly,
second flat washer and lock washer on to stud
followed by the Nylock nut.
A. Using supplied socket wrench, spin
Paralink assembly until nut is finger tight
followed by an extra 1/4 turn.
A. Install end cover by reversing step 1.
1
Thrust Bearing Assembly
Flat Washer
Lock Washer
Flat Washer
Nylock Nut
PARALINK TO ELITE MOUNTING INSTRUCTIONS
2
3
4
092309V1
