ICW UL500, Instructions

ICWUSA.com, Inc.

If you have any questions, please call 1-800-558-4435

ULTRA ARM INSTRUCTIONS

ULTRA ARM INSTRUCTIONS - rev  12/06/2012 mf

ATTACH VESA

Mount the VESA

plate to the

friction mount

using the 5/32” hex key and the 

1/4-20 fl at head screws in the 

hardware bag.

ATTACH TO MONITOR

Attach your 

monitor to the 

VESA plate

using the four 

4mm screws in 

the hardware bag.

ADJUST TILT HANDLES

Use the 

handles to 

adjust the tilt 

of the monitor.

IF USING UL500

IF USING UL510

ADJUST TILT & MONITOR HEIGHT

Use the handles 

to adjust the tilt of 

the monitor.

Adjust the height of 

the monitor along 

the rails of the 510. 

Then tighten in place 

using slider knob.

Slider Knob

ATTACH VESA

Mount the VESA

plate to the

friction mount

using the 5/32” 

hex key and the 

1/4-20 fl at head 

screws in the 

hardware bag.

ATTACH TO MONITOR

Attach your monitor to 

the VESA plate user the 

four 4mm screws in the 

hardware bag.

IF MOUNTING TO A DESK

ATTACH DESKMOUNT TO DESK

Drill a 3/8 hole through the 

horizontal surface you intend to 

mount to and push the 3/8 stud 

on the desk mount through the 

hole. Slip the large mounting 

washer over the stud from 

underneath, add the 3/8 split-

washer, and secure in place 

with the 3/8 nylock.

Screw stud into desk mount

Desk

Desk

Washer

Nylock