Quick installation guide IB-1817Ma-C31
8. Install the cover and fasten two
screws. Please make sure the write pro-
tection switch is placed in the square
hole when installing the cover.
7. Install the PCB back into the track
inside the housing.
Pay attention to the correct alignment!
6. Put the heatsink on the thermal pad
and align the notch to the screw nut.
5. Place the delivered thermal pad
directly on the M.2 NVMe SSD.
To get in close contact with the enclosure
for an optimal heat dissipation, please
use the right thermal pad accordingly to
your available M.2 NVMe SSD.
- 0,75 mm/grey for thicker SSDs
- 1,0 mm/blue for thinner SSDs
Note!
Change the write-protect mode
before
connecting to computer*
5
6
7
8