Quick installation guide IB-1817Ma-C31
2. Usage
1. Connect the IB-1817Ma-C31 via the delivered cable to the corresponding
port of your host computer.
2. When the IB-1817Ma-C31 has been plugged correctly the LED will turn
on white!
3. As soon as the write protection has been activated by switch, the LED lights
up red*
*Important! A change of the write-protect mode will only be activated
when the device has been disconnected and then reconnected to the host
computer.
3. Application
Drives must be initialized and have active partitions to be immediately reco-
gnized as volumes in the operating system. If this is not the case, initialize the
drives in the volume management of your operating system.
•
The external drive can be connected to or disconnected from the com-
puter via USB cable without shutting down the computer.
•
Please await the end of read/write operations before disconnecting
the drive to avoid data loss.
The full USB 3.2 Gen 2 transfer rate can only be achieved with a compatible
USB 3.2 Gen 2 host computer. Furthermore, the USB 3.1 drivers must be
installed by the operating system. If this is not the case, install the appropriate
drivers for your operating system (Windows
®
, macOS
®
).
For more information, please visit www.icybox.de.
