background image

Product overview

1. 

LED for power and write protection status

2. 

Switch for write protection activation

3. 

USB 3.2 Gen 2  Type-C

®

 interface to host connection

Important product information

Dear customer, 
please note the following information about the compatibility of USB  Type-C

® 

enclosures and adapters, including this device!

• Your host computer must have a USB  Type-C

®

 or a USB  Type-A interface. 

• The IB-1817MC-C31 also works with computers and notebooks with 

USB 3.0/2.0/1.1  Type-A interfaces as long as the appropriate adapter 
is used. 

•  The enclosure also works on devices with a  Thunderbolt

 3 interface with 

the transfer rate of up to 10 Gbit/s specified by USB 3.2 Gen 2 .

•  The   Type-C

®

 interface can be connected to USB 3.0 or 2.0 standard in 

some notebooks and computers. The enclosure only supplies the full data 
transfer rate of up to 10 Gbit/s to USB 3.2 Gen 2  Type-C

®

 interfaces.

• The following operating systems are supported: Windows

®

, macOS

®

Packing content:

1x IB-1817MC-C31 (M.2 drive not included)
1x Type-C

®

 to Type-C

®

 + Type-A cable 

1x Silicone thermal pad 
1x M.2 rubber fixation
1x Heat sink 
1x Tool for write protection switch
1x Screw set 
1x User Manual

Quick installation guide IB-1817MC-C31

3.

1.

2.

Summary of Contents for IB-1817MC-C31













Reviews: