Quick installation guide IB-1817MC-C31
2. Remove the PCB.
3. Carefully place your SSD into the
M.2 slot with the connection side and
at an angle of approx. 30° so that it
inserts without resistance. Insert the
round rubber fixation into the semi-cir-
cular recess at the end of the M.2 SSD.
1. Remove the two screws A from the
front cover.
1
2
3
4. carefully push the M.2 SSD with the
rubber fixation down until the rubber
fixation fits through the hole of the PCB.
Please make sure to align the fixture to
the PCB hole before pressing the fixture
through the PCB hole.
4
