Manual IB-1818-U31
Important product information
Dear Customer,
please note the following information about the compatibility of USB
enclosures and adapters, including this device!
• Your host computer must have a USB Type-A interface.
• The IB-1818-U31 is downwards compatible USB 3.0/2.0/1.1
Type-A interfaces.
• The enclosure only supplies the full speed of 10 Gbit/s
to USB 3.1 (Gen 2) interfaces.
• The following operating systems are supported: Windows
®
, macOS
®
Package content
IB-1818-U31, screwdriver, set of screws, manual
Key Features
• Interface to host computer: USB 3.1 (Gen 2) Type-C
™
, up to 10 Gbit/s
• B-Key socket for SSDs with B-Key or B+M-Key, 22x 30/42/60/80 mm
• Retractable mechanism to protect the integrated Type-Aport
• Supports SATA III transfer rate of up to 6 Gbit/s
• LED for power and access
• Supports Windows
®
, macOS
®
Application
To connect the drive to the PC, push the button down and slide the USB port
out of the enclosure. To store the enclosure and protect the USB port, press
and pull the button and slide the USB port and PCB back into the enclosure.
1. The external SSD can be connected to or disconnected from the computer
without shutting down the computer.
2. Please await the end of read/write operations before disconnecting the
SSD to avoid data loss.
3. A new SSD must first be initialized, partitioned and formatted by the
operation system to be displayed by the system.
If the drive isn’t recognized instantly by the operating system please check:
- if the driver software is installed (USB),
- if the SSD is initialized, partitioned and formatted.
