Manual IB-1818-U31
Manual IB-1818-U31
SSD Installation
1. Open the bottom cover by removing the two screws.
2. Push the sliding mechanism down to under the edge of the housing and
pull the PCB out of the housing.
3. Insert your SSD carefully with the connection side into the M.2 socket at
an angle of about 30° so it fits in smoothly. Then push the SSD card down
and fix it with the screw at the end of the SSD card.
4. Carefully insert the PCB with the SSD into the housing, push the sliding
mechanism under the edge of the enclosure, and reattach the bottom
cover.
3
2
4
1
