Cooling fan
Application
The external drive can be connected to or disconnected from the computer via
USB cable without shutting down the computer.
A new SSD must first be initialized, partitioned and formatted by the operati-
on system to be displayed by the system.
If the drive isn’t recognized instantly by the operating system please check:
• if the driver software is installed (USB),
• if the SSD is initialized, partitioned and formatted.
Please await the end of read/write operations before disconnecting the
drive to avoid data loss. The full USB 3.1 (Gen2) transfer rate can only be
achieved with a compatible USB 3.1 (Gen2) host computer. Furthermore,
the USB 3.1 drivers must be installed by the operating system. If this is not the
case, install the appropriate drivers for your operating system (Windows
®
,
macOS
®
).
Manual IB-1822MF-C31
Fan with intelligent temperature control by built-in IC
chipset. If the temperature of the device rises above
40° C, the fan starts automatically. If the tempera-
ture of the device falls below 40° C, the fan stops
automatically.
