Manual IB-1824ML-C31
1. Take out the PCB.
3. Then push the SSD card down
and fix the M.2 nut with screw-B as
displayed.
2. Combine the circular notch of the
round M.2 holder with the semi-cir-
cular notch of the M.2 SSD and hold
it with one finger (the thinner side
upwards). Insert your SSD carefully
with the connection side into the M.2
socket at an angle of about 30° so it
fits in smoothly.
4. Place the delivered thermal pad
directly to the M.2 NVMe SSD.
To get in close contact with the enclo-
sure for an optimal heat dissipation,
please use the right thermal pad
accordingly to your available M.2
NVMe SSD.
- 0,75 mm/grey for thicker SSDs
- 1,0 mm/blue for thinner SSDs
Manual IB-1824ML-C31