Manual IB-182MU3
Package contents
1x IB-182MU3, 1x USB 3.0 data cable, 1x screw set, 1x screw driver, 1x manual
Key features
•
Compact aluminium case for mSATA SSD 6 Gbit/s
•
USB 3.0 transfer rate up to 5 Gbit/s
•
Supports USB Attached SCSI Protocol (UASP)
•
Compatible with USB 2.0/1.2
•
Supports: Windows and macOS
•
Plug & Play and HotSwap
M.2 Installation
1.
After opening, pull out the PCB
2.
Fasten the M.2 by tightening the screws
3.
Reinsert the M.2 + PCB on the intended track
4.
Fasten the back cover by tightening the screws
Application
•
The external SSD can be connected to or disconnected from the computer
via USB cable without shutting down the computer
•
Please wait for the end of the read/write operations before disconnecting
the SSD to avoid data loss
•
A new SSD must first be initialized, partitioned and formatted by the operati-
on system to be displayed by the system
•
If the hard disc isn’t recognized instantly by the operating system please
check:
- if the driver software is installed (USB),
- if the SSD is initialized, partitioned and formatted
Manual IB-182MU3
1.
2.
4.
3.
