Manual IB-185M2
Package contents
1x IB-185M2, 1x manual
Key features
•
USB 3.1 Gen 2 up to 10 Gbit/s
•
For M.2 SSD with B-Key or B+M-Key, 22 x 30/42/60/80 mm
•
Connector to PC: Type-C
™
USB connector integrated
•
Plug & Play, Hot Swap
•
Toolless SSD installation
•
Supports Windows, Mac 10.7.4 or later version
SSD Installation
1.
Press clicker aside to loosen attachment
2.
Push M.2 SSD inside the slot
3.
Hold clicker at the End of the M.2
4.
Press clicker on the board
5.
Close the cover
Application
•
The external SSD can be connected to or disconnected from the computer
via USB cable without shutting down the computer.
•
Please await the end of read/write operations before disconnecting the SSD
to avoid data loss.
•
A new SSD must first be initialized, partitioned and formatted by the ope-
ration system to be displayed by the system.If the hard disc isn’t recognized
instantly by the operating system please check:
- if the driver software is installed (USB)
- if the SSD is initialized, partitioned and formatted.
1.
2.
4.
3.
Manual IB-185M2
