Manual IB-3810-C31
GENERAL INFORMATION
Under Windows
®
, users can enable GPT when initializing drives with a total capacity of more than 2 TB.
If users enable MBR by mistake, in order to clean the partition table, you have to switch to another RAID mode and do the RAID
mode switch all over again referring to Setup. Then go back to the RAID mode you want, repeat the previous actions and enable
GPT when initializing drives.
For macOS
®
users: the total capacity of more than 2 TB could be recognized only for the operation system is 10.4.11 Tiger or later.
When the USB cable is plugged out or the host computer set to stnd-by or off, the device goes to stand-by mode automatically.
Setting up motherboard‘s power management in S3 is recommended. (For more details, please refer to
the user guide of motherboard BIOS setting).
If the device takes too long to initialize, please check if the drive is securely installed.
If there is noise with the fan, power off the device, unscrew the fan, take out the cover, clean the fan
and assemble it back.
If the noise is still present, you can change the fan with another identical fan of size 140 x 140 x 25 mm
If the fan stops working, do not dismantle it. Please send back to the retail store immediately.
Operation Environment:
Temperature 0 ~ 45 °C
up to humidity 90% RH
Operating system:
- Windows
®
- macOS
®
