Manual IB-3810-C31
Close the front door until it has been locked and the HDD locks into the connector.
If required, the door of each drive bay can be locked.
- To remove a hard disk, carefully pull the handle of the front flap forward and loosen the internal connection of the hard disk so
that you can then remove the drive.
Note
:
- To protect the drives and the device, you can turn off each drive bay individually without disconnecting the other drives when you
add or remove a drive.
- Connect the power adapter and connect the USB cable to your computer and power on the device via power switch of the
power supply at the rear side.
If the drive bays without hard disks are switched on, the corresponding LED lights up red.
If drive bays with inserted hard disks are switched on, the corresponding LED lights up blue.
During access, the corresponding LED flashes purple
