Manual IB-G226L-C31
5.
Push the inner frame back into the housing.
ATTENTION:
Make sure that the inner frame is placed in the right
direction.
Application
•
Connect the enclosure to a free USB 3.1 (Gen 2) Type-C
®
port
of your host computer using the delivered USB Type-C
®
cable .
•
The Drive will be recognized automatically by the operating system via
Plug & Play.
Note:
A new drive must be initialized, partitioned and formatted by
the operating system to be displayed by the system. If the hard disc is not
recognized instantly by the operating system, please check:
-if the drive is initialized, partitioned and formatted
-if the driver software is installed (USB)
•
The enclosure can be connected or disconnected from the host computer
via USB cable without shutting down the computer.
ATTENTION:
Please await the end of read/write operations before
disconnecting the Venclosure in order to avoid data loss!
USB Type-C
®
host connection
RGB ON/OFF
switch
