Manual IB-LAN300-C3
Manual IB-LAN300-C3
Installation
Hardware Installation
• Connect a CAT5/6/6a cable to the RJ45 Port on the network adapter and to a network
device such as a router.
• Connect the USB Type-C
®
or -A (adapter) connector on the network adapter to
a USB 3.0 Type-C
®
or -A port on the host computer.
Driver installation
macOS
®
and Linux
®
(LTS)
• The adapter provides native driver support for macOS
®
and Linux
®
(LTS) and can be
attached to such systems without any driver installation.
Windows
®
When this adapter is connected to a Windows
®
based PC that can automatically start
"auto
run"
function for CD driver installation, the window below will pop up on your screen (if the
PC has not been installed with the driver of this adapter before), then you need to click "Yes"
to finish installation.
• If the driver does not automatically installs itself when you connect the network adapter to
the host computer, the following message that a
virtual CD
is loaded will appear:
