background image

Please read carefully the following information to prevent injuries, damage to material and device as 

well as data loss:

Warning levels

Signal words and safety codes indicate the warning level and provide immediate information in terms of the probability 

of occurrence as well as the type and severity of the consequences if the measures to prevent hazards are not complied 

with.

Warns of a 

directly

 hazardous situation causing 

death or serious injury

.

Warns of a 

potentially

 hazardous situation that 

may

 cause death or serious injury.

Warns of a 

potentially

 hazardous situation that 

may

 cause minor injury.

Warns of a 

potential

 situation that 

may

 cause material or environmental damage and disrupt 

operative processes.

1.  

Risk of electrical shock

Contact with parts conducting electricity

Risk of death by electrical shock

•  Read the operating instructions prior to use

•  Make sure the device has been de-energised prior to working on it

•  Do not remove contact protection panels

•  Avoid contact with conducting parts

•  Do not bring plug contacts in contact with pointed and metal objects

•  Use in intended environments only 

•  Operate the device using a power unit meeting the specifications of the type plate only!

•  Keep the device/power unit away from humidity, liquid, vapour and dust

•  Do not modify the device

•  Do not connect the device during thunderstorms

•  Approach specialist retailers if you require repairs

2.  

Hazards during assembly (if intended)

Sharp components

Potential injuries to fingers or hands during assembly (if intended)

•  Read the operating instructions prior to assembly

•  Avoid coming into contact with sharp edges or pointed components

•  Do not force components together

•  Use suitable tools

•  Use potentially enclosed accessories and tools only

3.  

Hazards caused by a development of heat 

Insufficient device/power unit ventilation

Overheating and failure of the device/power unit 

•  Prevent externally heating up components and ensure an exchange of air 

•  Do not cover the fan outlet and passive cooling elements

•  Avoid direct sunlight on the device/power unit

•  Guarantee sufficient ambient air for the device/power unit

•  Do not place objects on the device/power unit

4.  

Hazards caused by very small parts and packaging

Risk of suffocation    

 

Risk of death by suffocation or swallowing

•  Keep small parts and accessories away from children

•  Store/dispose of plastic bags and packaging in an area that is inaccessible to children

•  Do not hand over small parts and packaging to children

DANGER

WARNING

CAUTION

IMPORTANT

WARNING

CAUTION

IMPORTANT

WARNING

Safety information IB-RD3802-C31

Summary of Contents for IB-RD3802-C31

































Reviews: