® Waves System
V 1.0 - 2008
I.D. AL - MultiPlayer - Audio and Vidéo player - Manual
- 7 -
4 - Operation mode and naming of files
The first stage is to copy files onto the USB storage device.
Connect the USB stick to a personal computer and copy the files at the root of the stick. Any name can
be chosen except special characters.
Depending on the «Autoplay» mode selected, the files read on powering on will be the audio or the video
files.
The files are read in the same order they were copied onto the stick
It is not possible to combine different file formats for a continuous playback
Supported file formats:
Audio:
- MPEG-2
- MPEG-1 layer 2
- MP3 128kpbs to 32kbps - 32kHz / 44.1kHz / 48kHz
Video:
- Xvid (.avi)
- MPEG-1 (.mpg / .mpeg)
- MPEG-2 (.mpg / .mpeg)
Recommanded maximum bit rate: 10mbits/s
Format: 4/3 and 16/9
Norme: PAL and NTSC
Use in audio player mode:
Select «music» in the Setup menu (see next chapter)
Audio files are played back in loop one after the other.
The remote control allows change of track, move forward and reverse at various speeds.
Use in video player mode:
Select «movie» in the Setup menu (see next chapter)
Video files are played back in loop one after the other.
The remote control allows change of track, move forward and reverse at various speeds.
5 - Interface and configuration
Pressing the «menu» key on the remote control, gives access to the configuration page.
The four file formats read by the player are displayed as 4 icons at the top of the screen:
Photo: to display still images as a slide show (under development)
Music: to listen to audio files
Photo + music: to display slide shows and listen to music at the same time (under development)
Movie: to watch video files
Select the type of file to be broadcast using the arrow keys on the remote control and confirm the choice
with the «play» key.
