ID-AL - My Music Player and My Music Player LE - User Guide V1.0
number as shown in Accessing the Player with Internet (page 51).
5. In the
Username
setting enter the username of the FTP connection (by default
ftp
). To change the
username, please refer to
FTP Server Access
section in Ethernet Page (page 81).
6. In the
Password
setting enter the password of the FTP connection (by default
ftp
). To change the
password, please refer to
FTP Server Access
section in Ethernet Page (page 81).
7. Limit the number of simultaneous connections to
10
.
8. Log on to the FTP server of the player. The FTP client software displays a list of folders that shows
the storage devices plugged to the player. Each folder name is composed of the name of the
connector used and a mount point of the storage device on this connector (e.g.
:1.0-scsi-
0:0:0:0-part1
or
:part1
).
•
On the My Music Player, the connector names are:
▪
usb-ext
for the External USB host receptacle.
▪
usb-int
for the Internal USB host receptacle.
▪
sd
for the SD/SDHC memory card slot.
▪
sata-hdd
for the SATA host receptacle
(HW V1.0 only)
.
•
On the My Music Player LE, the connector name is:
usb
.
9. Open the folder name that pertains to the connector used with the Main Media (e.g.
usb-
int:1.0-scsi-0:0:0:0-part1
or
usb:1.0-scsi-0:0:0:0-part1
).
10. Manage the content of the Main Media.
11. When the content updating is completed, please log off to the FTP.
. Using the Embedded Samba Server
Description
•
Manage the content of the Main Media over a local network with the use of a Samba client.
Embedded Samba Server
Requirements
•
A computer with a Samba client file manager.
•
A LAN (Local Area Network) access from the player and the computer.
Recommended usage
•
This method is recommended when the update is done remotely over a local Ethernet network,
player by player.
•
Pros:
◦
Easy to use.
◦
Recommended for off-site handling.
◦
Recommended for a content management directly done by the end user.
◦
Recommended whit the use of a built-in connector for the Main Media (My Music Player only).
◦
Recommended for the management of one or more players on the same local network.
•
Cons:
◦
Limited to a local area network (LAN) use.
◦
The Scheduler function cannot be used to execute the content updating that depends on a
remote operation.
◦
No recommended for a large number of players.
◦
For technical reasons, the use of the SATA are not supported properly with the FTP functions
(My Music Player HW V1.0 only)
.
◦
The management of a large number of players can require higher level of skill for the Samba
clients tools used (batch, scheduling, content synchronization).
Procedure
-42-
© 2017, Waves System
