I.D. AL - VP100 Full HD 1080p video player - User manual
® Waves System
V 1.0 - 2010
- 6 -
4.2 - Play manually the audio/video files
1 - Use a SD card or USB flash memory already formated in FAT32* and copy one or more video, audio
or images files (see annex B for compatibility).
2 - Insert the SD card or USB flash memory in front of the player and connect the power supply. The player
start and the status LED change from red to orange.
3 - When player is ready, status LED change to green.
With the remote control, select your media, (SD card
or USB1) and press OK. You can see now the transport
menu.
Note : HDD and USB2 are reserved to internal connector
for options. Please, contact us for more informations.
4 - With the remote control, select a file
and press OK to play. Press ESC to stop
and see the menu screen.
Note : In this menu, press «ACT» to
select VIDEO, AUDIO, IMAGE ou FILE
tab. Press «ESC» to display main menu.
4.3 - Autoplay when switch on a audio, video or image file
1 - Use a SD card or USB flash memory already formated in FAT32*. Create a new folder named
«_autoplay». Copy the audio/video files you want in this folder. (see annex B for compatibility)
2 - Insert the SD card or USB flash memory in front of the player and connect
the power supply. The player start and the status LED change from red to
orange.
3 - When player is ready, status LED change to green. At this moment, the
VP100 start to play the files in the "_autoplay" folder in accordance to the
«AutoPlay» option in the Setup menu. (see chapter 6.3). To stop, press
ESC key using the remote control.
Note : if few media are inserted in the player, the priority is :
CARD (SD/SDHC) -> USB1 -> HDD -> USB2
4.4 - SD card contain update using USB connector
You can update the folder "_autoplay" in SD Card using a USB media. In this case, SD Card is the main
media and USB memory is used to update the SD Card.
