I.D. AL - VP100 Full HD 1080p video player - User manual
® Waves System
V 1.0 - 2010
1 - To do this procedure, you have to use a USB flash memory formated in FAT32*. From here, 2 cases
are possibles :
A - Create a folder named "_replaceall" if you want to replace every file in the "_autoplay" folder of the SD
Card.
B - Create a folder named "_update" if you want to add or replace only few file in the "_autoplay" folder of
the SD Card.
Copy in this folder of the USB memory every audio/video files you need for the update.
2 - When the player is operational, play or stop mode, insert the USB memory in the connector. A new
screen show "USB SYNC MODE" during the update procedure.
3 - Wait the "USB SYNC MODE" turn off, (time is proportional to the quantity of file to copy). When the
copy is finished, the player start to play the files, then you can remove the USB memory.
4.5 - Sleep and waking mode
To stop the player and place in sleep mode, press on/off push button from the front face or press on/off
key from the remote control. (see annex D) The status LED change from green to orange during 5 seconds
and to red when the player is in sleep mode.
In sleep mode, the consumption is only 50mA. You can wake up at any time when you press the On
button.
* NTFS and EXT3 file system are also supported, but don’t offer the same possibilities. (see annex C)
- 7 -
