background image

 ID Lock 202 Multi 

 

Installation manual 

 

2022-11-30 

 

Introduction 

Welcome to a keyless everyday life with ID Lock 202 Multi which has been designed as an easy to 
install, easy to use, safe and secure electronic door lock for Scandinavian doors. 

At idlock.no you will find up-to-date installation and user manuals for both ID Lock 202 Multi and add-
on 

modules. You will also find an assembly film on ID Lock’s YouTube channel that should be used 

when installing the door lock on your door in addition to this manual and the quick guide provided in 
the sales box. 

Carefully read the ID Lock Terms of Use and Precautions before installing your ID Lock 202 Multi. 

Terms and conditions 

ID Lock 202 Multi must be installed in compliance with this user manual. Malfunctions caused by either 
willfully, neglected, or unqualified use or installation, or in disagreement with our terms, conditions, or 
user manuals, will waive any rights to file complaints. Reckless or irresponsible use or installation may 
lead to one or more of the following results: Product failure, loss of property, or harm to people.  

The operating temperature range is -25°C to 70°C. When installed in coastal areas, corrosion may 
occur on exposed parts. 

The outside unit has a high degree of protection to water and dust. It is resistant to water spray from 
all directions. The lock is not resistant to pressure washing or similar. 

ID Lock is suited for most doors manufactured in accordance with SIS 817383 (1978 and newer). ID 
Lock cannot be held responsible for any eventual customizations of the door. ID Lock cannot be held 
liable to replace any items other than the product, regardless of direct or indirect cause. 

At least one RFID key fob must be programmed, and kept in case it is needed for emergency unlocking. 

The lock must be updated to the latest available version for all functions to be available. 

Check your lock with 9V batteries before you start using your lock.  

Cleaning of the ID Lock is done with a microfiber cloth and water. Do not use solvents and soaps. 

Precautions 

We know that you know how to use batteries and how to recycle, but are obligated to include these 
lines of precautions in our manual: 

ID Lock 202 Multi must be used with Alkaline batteries only. Use 4 or 8 batteries of the same brand. 
Replace all batteries at the same time. ID Lock 202 Multi is rated 6 VDC. Replacement of a battery with 
an incorrect type can defeat a safeguard. Disposal of batteries used on your ID Lock into fire or a hot 
oven, or mechanically crushing or cutting of a battery, can result in an explosion. Leaving batteries in 
an environment extremely high temperature can result in an explosion or leakage of flammable liquid 
or gas. A battery subjected to extremely low air pressure may result in an explosion or leakage of 
flammable liquid or gas. 

  
This symbol indicates DC voltage. 

 

This product bears the selective sorting symbol for Waste electrical and electronic equipment 
(WEEE). This means that this product must be handled pursuant to European directive 
2012/19/EU in order to be recycled or dismantled to minimize its impact on the environment. 

As a user you can choose to give this product to a competent recycling organization or to the retailer 
when you buy a new electronic product.

 

 

Summary of Contents for 202 MULTI

















Reviews: