Track | 9
Using the Product:
The lanyard, or neck strap, attached to the device is a convenient way to carry and use your new i.d.
mate Quest. The parachute buckle has been added to the lanyard as a quick way to remove it when not
in use.
With the device out of the case, place your head through the lanyard, positioning the padded area on the
strap to the back of your neck. Allow the device to hang down with the push buttons facing away from
your body. Adjust the length of the lanyard straps to your personal comfort by using the adjustable clips
found on both sides of the neck pad.
We will now look at the different ways to hold your i.d. mate Quest. Each has different benefits. The
first way is to place your thumb in between the ridges on the side, and wrap your fingers around the
back, to the other side, positioning them between the ridges.
The second way is to place your last 3 fingers in between the ridges on the front of the unit, and your
thumb on the back. This allows your index finger to manipulate the buttons on the keypad.
A third option is to hold the unit with your thumb on the top of the keypad, and your fingers wrapped
around to the back of the unit. This way, you can use your thumb to operate the buttons, and if you are
familiar, you might think of it as you would a flashlight, with the scanner in the same position as the
light would be.
Do you still have questions about how to best hold your Quest? We encourage you to take some time to
explore the device to find a position that works and feels best for you.
Now, to help you understand the scanning process, let’s go through a couple of scan exercises. Locate
the Warranty Card included in this package. On one side of this card is a barcode label.